18
CAUTION
: Insert only one photo at a time, and insert the next
photo only when the previous one is done,
otherwise the Photo Converter may malfunction.
Notes
:
Do not remove the memory card or disconnect the power
supply while the indicators are blinking.
This Photo Converter only supports output images in JPEG
(.jpg) format, and the date/ time attribute will not be added.
For more information on how this Photo Converter stores
the scanned image files on the memory card, refer to
“Orientation” on page 14.
If the memory card is near full (lower than 1MB), the
Status/Card indicator blinks (
refer to “Indicator Lights” on
page 10
). Use another card or delete some files on it if
necessary.
To
power down the Photo Converter
after
all originals are scanned, press and hold
the power button for one second. The
power indicator will blink and then go off.
Now you can safely disconnect the power
and remove the memory card from the
Photo Converter.
Note
:
The Photo Converter will automatically power off if it’s left
idle for 15 minutes
(if not connected to the PC)
.
Scan 35mm Negatives & Slides
Notes
:
This Photo Converter only supports the scanning of 35mm
negative/monochrome 6-frame filmstrips and un-mounted
positive slides, commonly available from your local photo
studios. Mounted films/slides are not supported.
Filmstrips in certain conditions are not suitable for scanning.
Refer to
Suitable and Unsuitable Original Types
on page
11.
Содержание PANSCN05
Страница 1: ...User Guide PANSCN05 ...
