18
a. Insert the Bluetooth dongle to the USB host port and then turn on the
DPF. Please check Pandigital’s website for the comparable USB
Bluetooth adapters.
http://www.pandigital.net
b. From Home screen, you can see the BT (representing your Bluetooth
device and DPF is now connected) icon appears on the upper right hand
corner.
Step 2: Ensure the connectivity is established before sending photos to
DPF.
a. Search and Select the “Available Device” to connect from the list. You
should see “Pandigital” appears in the list. Authentication Code is “1234”
default value. Select “Pandigital” and continue transmitting photo to
DPF.
Note: the actual procedure of sending photo to your DPF may vary.
Please refer to your mobile device user guide manual for details.
b. When you transmitting selected photo to Pandigital DPF, you shell see
“Photo Transmitting” dialog appear in the middle of your DPF screen.
When copy photo completes, your DPF will play the copied photo immediately
after.
Setting Viewing Options
You can control all of the viewing options in the Setup Menu using the buttons
on the top of the frame or remote control. You can display the on-screen
Setup Menu at any time by pressing the Setup button. Only available setup
options will be displayed for each screen.
1. With the Home screen opens, press Setup to open the Setup Menu.
2. With the Setup menu open, use the Up and Down arrows to choose a
display option.
3. Press ENTER to select the option. A second menu opens, listing the
available settings. A blue highlight shows the current setting.
4. Use the Up and Down arrows to choose the desired setting.
5. Press ENTER to select the setting. The second menu closes.
6. You can make as many changes as you wish in the same manner. When
you are finished, press the EXIT button to close the Setup Menu and
return to the previous screen.
