![pandaboard OMAP 4 Series Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/pandaboard/omap-4-series/omap-4-series_system-reference-manual_3421352002.webp)
OMAP
TM
4 PandaBoard System
Reference Manual
Revision 0.4
September 22, 2010
DOC-21010
Page 2 of 83
IMPORTANT NOTICE
THIS DOCUMENT
This work is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported License. To
view a copy of this license, visit
http://creativecommons.org/licenses/by-sa/3.0/
or send a letter to
Creative Commons, 171 Second Street, Suite 300, San Francisco, California, 94105, USA.
For more information, see
http://creativecommons.org/license/results-one?license_code=by-sa
For any questions, concerns, or issues submit them to
PANDABOARD DESIGN
These design materials referred to in this document are
*NOT SUPPORTED*
and
DO NOT
constitute a reference design. Only “community” support is allowed via resources at:
http://pandaboard.org/content/community/home
.
THERE IS NO WARRANTY FOR THE DESIGN MATERIALS, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
DESIGN MATERIALS “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
DESIGN MATERIALS IS WITH YOU. SHOULD THE DESIGN MATERIALS PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
We mean it; these design materials may be totally unsuitable for any purposes.
PandaBoard.org provides the enclosed product(s) under the following conditions:
This evaluation board/kit is intended for use for
ENGINEERING DEVELOPMENT,
DEMONSTRATION, OR EVALUATION PURPOSES ONLY
and is not considered by
PandaBoard.org to be a finished end-product fit for general consumer use. Persons handling the
product(s) must have electronics training and observe good engineering practice standards. As such, the
goods being provided are not intended to be complete in terms of required design-, marketing-, and/or
manufacturing-related protective considerations, including product safety and environmental measures
Downloaded from
Downloaded from