P
a
n
chromatic
Eumig S810 S810D S810D Lux
User Manual
Page
22
Changing the lamp
(disconnect the mains lead first)
Lamp type: 12 volt/100 watt tungsten-halogen lamp with dichroic reflector.
Order N0. 031.004/6.
Not even the best lamp lasts for ever. If it falls you can easily change it yourself.
1.
Remove the lamp house cover.
2.
Pull off the lamp plug from the rear.
3.
Push down the lamp retaining spring and disengage by swinging to the
left, then remove the lamp. With multi-gauge projectors take care not to
move the coils on the sound changeover switch for film gauge switching.
4.
Fitting the new lamp: Never touch the bulb or inside of the reflector with
bare fingers. If you touch them accidentally, clean with alcohol or
methylated spirit. Lift the lamp retaining spring and push the lamp, in
contact with the lamp fitting, into the bottom centring guide. The centring
lug of the lamp reflector must engage the cut-out provided for it.
5.
Push down the lamp retaining spring and engage by moving to the right.
The lamp unit needs no subsequent centring.
6.
Re-attach the lamp plug and replace the lamp house cover.
Replacing the fuse
(disconnect the mains lead first)
The fuse rarely needs changing, but here is how you do it: The fuse protects the
amplifier against overloads, but does not protect the projector against damage
