P
a
n
chromatic
Eumig S810 S810D S810D Lux
User Manual
Page
12
Once the film is threaded and the projector is running:
1
Adjust the projected image size by turning the zooming ring.
2
Focus the image sharply by turning the line focusing control.
3
Adjust the frame line control if parts of two frames appear on the
screen with a frame line between them.
4
Adjust the elevation control.
5
For reverse projection, turn the main central switch to "reverse
projection" the film now runs backwards. When you change the
running direction the frame line may need adjustment.
6
Rapid rewind; after the Film has run through, attach the end directly to
the front reel over the projector and turn the main switch to reverse".
7
When projecting sound films, adjust to the required playback volume
by turning the volume control to the right
At the end of every show always turn the main switch back to "stop"
Changing the running speed
Important: Before changing the running speed, always turn the
main switch to stop and connect the projector to the mains supply. After
switching from 24 to 18 fps, wait for a couple of minutes before projection to
allow the flywheel speed to stabilise.
