P
a
n
chromatic
Eumig S810 S810D S810D Lux
User Manual
Page
15
The procedure is simple
1
Connect the tape recorder, record player etc. to the socket (1)
2
Turn the mixing control fully to the right to engage (2)
3
Press the red recording key (3)
4
Turn main switch all the way to “forward projection” (4)
5
The sound being recorded can be monitored via the built in speaker.
Use the volume control to adjust the sound volume as required.
Music dissolves
A soft dissolve from one piece of music to another is suitable for cuts
between similar shots.
1 Record the music for scene No. 1. Stop the projector just after scene No 2
appears on the screen (The recording key automatically jumps out)
Switch the main switch to reverse projection' and run the film back about
3 or 4 seconds beyond the cut.
2 Turn the mixing control fully to the left, press the recording key and turn
the main switch all the way to "forward projection" Then gradually turn
the mixing control to the right until it engages At the same time run the
record or tape to record the music for scene No. 2.
