PANAVISION Genesis, Руководство пользователя

Страница: 87 / 278

Panavision Genesis Manual v1.3
–
87
V39
7.6 VTR SRWC panel – FUNC controls
FUNC yellow button
Multi-purpose control. Keep this button pushed down and then press
another button to get one of the functions detailed below:
FUNC + STOP
Puts SRW-1 in STANDBY OFF
mode
The VTR must be in Standby Off before you can change Recording
settings. Push FUNC + STOP if you get an error message stating
“Can’t change while Standby On” See
20.11
FUNC + PLAY
When recording is paused, this is the equivalent of REC REVIEW
assignable switch on the Genesis (See 4.2 ). This function is defined
by the SYSTEM -> SERVO -> REC REVIEW menu
The Record Review function automatically rewinds the tape and
plays back the last 10 seconds (or 3 seconds) of the last take, and
then stops, cueing the tape for the next recording.
When tape is stopped, push to cue tape at the end of last recording.
FUNC + REC
Temporarily memorizes the current position as the Mark In point for
future cueing.