PANAVISION Genesis, Руководство пользователя

Страница: 105 / 278

Panavision Genesis Manual v1.3
–
105
V39
9.8 Charger LED indications
The GPC charger has 9 LEDs on its top
The central Green POWER LED indicates that the unit is on. On each
side, there are two pairs of Green and Red LEDs (8 in all) that
indicate the charge status of the four cells in the Genesis 14NM33
battery.
When you power the GPC charger, you should see the following
self-test LED sequence:
1. Each LED turns ON from left to right
2. All the LEDs flash
If you don’t see this sequence, it may indicate a faulty GPC unit.
Contact your Panavision representative.
When you connect a battery to the GPC charger, you should see the
following LED sequence:
1. All the LEDs flash
2. All 4 red LEDs slowly flash, indicating the unit is charging the
battery
3. When the battery is 80% charged, the LEDs will flash green.
In a pinch, the battery can be used although it is not fully
charged.
4. When all the LEDs are a solid green, the battery is fully
charged.
Genesis batteries normally take 6-7 hours to recharge.