29
CHANNEL
Select specified channel for motion zone setup.
MOTION ZONE
Select either Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY
Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1(L) to 9(H).
PRIVACY ZONE
Select the privacy zone through mouse drag (Left-up to right
down). To escape from this setting page, select Quite after
press the right button on the mouse.
KEY TONE
Enable/disable key tone.
REMOTE CONTROL ID
Select an ID of remote control.
1. Select ID.
2. Press the same number as ID set in DVR on a remote control
3. Then icon will be displayed on Live screen of DVR that
respond to the remote control. The options are from 0 to 99
SENSOR
Select sensor Number from 1 to 4
TYPE
Set the type of sensor for the specified channel. Options are:
OFF, N/O (normal open), and N/C (normal closed).
VIDEO INPUT TRIMMING
ON (Display 960x 576), OFF (Display 944 x 576). Select this
menu after checking the right inputting camera resolution
3-4-1. ALARM-OUT
Figure 3.4.2. ALARM-OUT setup screen
Table 3.4.2. Menu item in ALARM-OUT Setup screen
Item
Description
ALARM OUT
Available Number is just one (1).
ALARM DURATION
Set the alarm dwell time from 5 seconds to infinite.
3-4-2 Controller & PTZ Setup
To control the PTZ functions of the camera, connect a controller to the RS-485 port.
①
Connect the RS-485 cables of PTZ camera to the RS-485 port on the rear panel.
Содержание X-Plus Series SP-DRH04
Страница 81: ...81 9 7 3 DEVICE ...
Страница 82: ...82 9 7 4 STORAGE 9 7 5 SYSTEM ...
Страница 83: ...83 9 7 6 SECURITY 9 7 7 NETWORK ...