52
■
Operation
Follow the steps below to operate the product.
Receiver
Reception
level indicator
Power indicator
Volume adjustment knob
Power switch
Audio level indicator
Antenna indicator
1
Turn ON the receiver
Turn the power switch of the receiver to ON.
The [POWER] indicator on the receiver lights green.
During the start-up process, the [ANTENNA] indicators change as shown in the
figure below. All [ANTENNA] indicators light in the beginning, and they gradually go
off as start-up progresses. Once start-up is completed, all they go off. After start-up,
they will show the connection status of their relative antennas.
8 indicators
on
6 indicators
on
4 indicators
on
2 indicators
on
All indicators off
(start-up complete)
(Actual
antenna
connection
status)
System starting up
Operating
memo
Important
See the table on “System start-up time” (page 15) for average
start-up times.
2
Turn ON the microphone
Turn the power switch of the microphone to ON.
The [RF LEVEL] indicator of the channel to which the microphone is paired lights
on.
The [AUDIO] indicator lights on when audio is input to the microphone.
3
Adjust the microphone volume
Adjust the volume adjustment knob.
How to use
PUQX1021YAV6_WX-SR204P_OI_en-fr.indb 52
2022/03/17 10:25:57