24
The microphone and this product must be paired with each other in order to establish a
connection.
Perform pairing to use a microphone which has not yet been paired to this product or when
a pairing error has occurred.
The maximum number of microphones that can be paired to an extension receiver and the
maximum number of microphones which can be used simultaneously are as follows.
When the maximum number of pairable microphones is exceeded, the newest microphone
will overwrite the oldest one.
Extension
receiver
Maximum number of
microphones that can be paired
Maximum number of microphones
that can be used simultaneously
WX-SE200P
6 per channel
4 (1 per channel)
Refer to the microphone manual for details on the pairing procedure.
memo
Important
Saving the pairing information for a paired microphone takes
approximately 10 seconds. Do not turn OFF the extension receiver
immediately (within approximately 10 seconds) after pairing a
microphone. Pairing cannot be completed if power is turned OFF.
■
Wireless pairing
Pair a microphone via wireless communication between the microphone and a wireless
antenna. Perform pairing within the wireless connection range of the antenna connected to
this product via the extension receiver.
1
Remove the battery cover of the microphone
Refer to the microphone manual for further details.
2
Set this product to pairing mode
Make sure that the [POWER] indicator on the extension receiver with this product
connected and the [POWER] and [STATUS] indicators on this product are lit green,
then press for at least two seconds the [REG] button of the channel to which you want
to pair a microphone. When the wireless receiver is in pairing mode, the [REG]
indicator of the channel whose [REG] button has been pressed will blink orange.
Pairing mode lasts for 30 seconds, so pair the microphone within this time.
This product
Pairing indicator
Power indicator
Pairing button
Status indicator
Pairing
PUQX1022YAV6_WX-SE200P_OI_en-fr.indb 24
2022/03/23 10:21:40
