25
** SET UP MENU **
PRESET 1
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
LOCAL/REMOTE
SPECIAL1
CAMERA
RS485 SET UP
OFF
OFF
OFF
AUTO PAN
ON
LOCAL
Setup menu
■
Auto Pan Key Setting
(AUTO PAN KEY)
This is used for assigning one of the following auto functions to the
AUTO key on the controller. Pressing the AUTO key activates the
assigned function after this setting.
• Move the cursor to AUTO PAN KEY and select an auto function by
moving the joystick to the right or left.
The factory default setting is AUTO PAN.
Mode changes as follows:
AUTO PAN:
Assigns the auto panning function to the key.
SEQ:
Assigns the sequence function to the key.
SORT:
Assigns the sort function to the key.
PATROL:
Assigns the patrol play function to the key.
Note:
Auto pan LED on the controller does not light if a function
other than the auto pan function is assigned. The auto pan
function cannot be stopped with the AUTO PAN key.
■
Digital Flip Setting (DIGITAL FLIP)
• Move the cursor to DIGITAL FLIP and select ON or OFF by mov-
ing the joystick to the right or left.
The factory default setting is ON.
OFF:
Tilt range is limited from 0 ° to 90 °.
ON:
The digital flip function allows the tilt angle to widen up to
180 °. The image on the monitor screen is flipped horizontally
and vertically at the tilt angle of approx. 135 ° (If the camera is
installed on a ceiling).
Note:
Tilt range narrows from 180 ° to 90 ° if PAN LIMIT is set to
ON.
Notes:
• Digital flip functions while moving the joystick downwards. In case
of moving the joystick to other directions, it does not function.
• When OFF is selected for DIGITAL FLIP, the following operations
are required to move the camera 180 ° vertically.
1) Move the joystick downwards to aim the camera down.
2) Move the joystick to the right or left to rotate the camera 180 °
horizontally.
3) Move the joystick upwards.
• To set preset position directly from the WV-CU360, WV-CU550B
or WV-CU161 System Controller, it is temporarily required setting
both the electronic zoom function and digital flip function to OFF.
Tilt range setting is disabled between 90 ° and 180 °.
AUTO PAN
SEQ
SORT
PATROL
** SET UP MENU **
PRESET 1
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
LOCAL/REMOTE
SPECIAL1
CAMERA
RS485 SET UP
OFF
OFF
OFF
AUTO PAN
ON
LOCAL
Setup menu
