64
4. Select a desired function by performing one of the fol-
lowing.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the function number with the numeric buttons.
The function setting will appear on the LCD.
The following diagram describes the function settings
changeable and their factory defaults.
Function
Table 2 Table 3
01 MENU
D
D
02 F1 – F4
E
E
03 F5 – F8
E
E
04 A B
E
E
05 TOP SW
E
E
06 JOYSTICK
E
E
07 FOCUS NEAR/FAR E
E
08 IRIS OPEN/CLOSE E
D
09 CAM/SET
E
E
10 MON/ESC
E
E
11 UNIT
E
E
12 RECORDER
E
E
13 CAM POSI
E
E
14 PRESET
E
E
15 PGM PRESET D
D
16 HISTORY
E
E
17 –/+
E
E
18 JOG DIAL
E
E
19 SHUTTLE RING E
E
20 SHUTTLE HOLD E
E
21 PLAY/PAUSE E
E
22 STOP
E
E
23 REC
E
D
24 ALM SUSPEND E
D
25 ALM RESET
E
E
26 OSD
E
E
27 ALM RECALL E
E
28 SEQ PAUSE
E
E
29 SEQUENCE
E
E
30 MULTI SCREEN E
E
31 EL-ZOOM
E
E
32 AUX1 ON/OFF E
E
33 AUX2 ON/OFF E
E
34 DEF ON/OFF E
E
35 WIPER ON
E
E
36 SYS FUNC
D
D
37 CAM FUNC
D
D
38 GO TO LAST E
E
39 MARK
E
E
40 SEARCH
E
E
41 T&D SEARCH E
E
E=Enabled, D=Disabled
5. Rotate the shuttle ring clockwise or move the 3D joy-
stick to the right. The cursor will jump to the next item.
Note:
To return to Step 4, rotate the shuttle ring coun-
terclockwise or move the 3D joystick to the left.
6. Select E or D by performing either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Note:
To change the settings of other functions, repeat
Step 4 to 6.
7. Press the ENTER or CAM (SET) button.
“Set OK?” will appear on the LCD.
Note:
To cancel the setting, press the EXIT or MON
(ESC) button. The LCD display will return to Step 6.
8. Press the ENTER or CAM (SET) button again.
The function levels will be set for the selected table.
“Memory” will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
●
Camera Level Setting
You can change the camera levels for each operator. The
camera levels range between Table No. 1 (highest level)
and 3 (Lowest level).
Notes:
• Table No. 1 is fixed to E (Enabled) for all cameras.
• As the factory default, Table No. 2 and 3 are set to
E for all cameras.
1. Display “Camera Level” sub menu. (Refer to Step 1 to 4
of p. 51 To Recall Menu Functions.)
2. Select a desired table (= camera level) by performing
one of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the function number with the numeric buttons.
3. Press the CAM (SET) button.
The setting menu for the selected table will appear on
the LCD.
Function Table2 405
08 IRIS OPEN/CLOSE=E
Camera Level 406
Table No. =3
Camera Level 406
Table No. =1
Function Table2 405
08 IRIS OPEN/CLOSE=D
Function Table2 405
Set OK?
Function Table2 405
Memory
Function Table2 405
08 IRIS OPEN/CLOSE=E
Содержание WVCU650 - SYSTEM CONTROLLER ADDENDUM
Страница 77: ...77 ...
