63
10. Set the camera level by performing either of the follow-
ing.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Notes:
• Refer to p. 64 Camera Level Setting for details on
camera level.
• You cannot change the camera level of Operator 1.
If you try to change, “Level 1 Fixed” will appear on
the LCD.
11. Press the ENTER or CAM (SET) button.
“Set OK?” will appear on the LCD.
12. Press the ENTER or CAM (SET) button again.
The new operator and the settings will be registered.
“Memory” will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
To delete an operator
Note:
You cannot delete Operator 1. If you try to delete,
“Level1 Fixed” will appear on the LCD.
1. Select an operator to delete by performing either of the
following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Note:
If you select an operator not registered, “No
Assign” will appear beside the operator number.
2. Press the CLEAR button.
“Clear OK?” will appear on the LCD.
Note:
To cancel deleting the operator, press the EXIT
or MON (ESC) button.
3. Press the ENTER or CAM (SET) button.
• The operator will be deleted.
• “Erased” will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
Note:
After the operator has been deleted, “No Assign”
will appear beside the operator number.
●
Function Level Setting
You can change the function levels for each button (except
for numeric buttons) of main unit and 3D joystick unit. The
function levels range between Table No. 1 (highest level)
and 3 (Lowest level).
Note:
Table No. 1 is fixed to E (Enabled) for all the func-
tions.
1. Display “Function Level” sub menu. (Refer to Step 1 to
4 of p. 51 To Recall Menu Functions.)
2. Select a desired table (= function level) by performing
either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the table number with the numeric buttons.
3. Press the CAM (SET) button.
The setting menu for the selected table will appear on
the LCD.
Operator Setup 404
Operator15 No Assign
Operator Setup 404
Operator07 Clear OK?
Operator Setup 404
Operator07 Erased
Function Table2 405
01 MENU =E
Operator Setup 404
Operator07 No Assign
Function Level 405
Table No. =1
Function Level 405
Table No. =2
Operator07 404
Camera Level = 2
Operator01 404
Level1 Fixed
Operator07 404
Set OK?
Operator07 404
Memory
Operator01 404
Level1 Fixed
Operator Setup 404
Operator07
Содержание WVCU650 - SYSTEM CONTROLLER ADDENDUM
Страница 77: ...77 ...
