Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM Скачать руководство пользователя

Страница: 62 / 126

4. Enter a user ID by pressing the numeric buttons.

“1” to “99999” are available for the user ID number.

Note:

If you have entered a wrong user ID, press the

CLEAR button.

5. Press the ENTER or CAM (SET) button.

The password entry form will appear on the LCD.

6. Enter a password by pressing the numeric buttons.

“1” to “99999” are available for the password.

Note:

If you have entered a wrong password, press the

CLEAR button.

7. Press the ENTER or CAM (SET) button.

“Function Level” setting menu will appear on the LCD.

8. Set the function level by performing either of the follow-

ing.

• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.

Notes:

• Refer to p. 63 Function Level Setting for details on

function level.

• You cannot change the function level of Operator 1.

If you try to change, “Level 1 Fixed” will appear on
the LCD.

9. Press the ENTER or CAM (SET) button.

“Camera Level” setting menu will appear on the LCD.

2. Press the CLEAR button.

“Clear OK?” will appear on the LCD.

Note:

To cancel deactivating auto login, press the EXIT

or MON (ESC) button.

3. Press the ENTER or CAM (SET) button.

Auto login or auto logout will be deactivated.
“Erased” will appear on the LCD for a few seconds, and
the LCD display will return to Step 1.

●

Operator Registration or Change

You can register new operators or change the parameter
settings. Up to 16 operators are registrable in the system.

Notes:

• Refer to p. 29 Operation Start (Login) for the factory

default.

• To return to the previous step, press the EXIT or MON

(ESC) button.

1. Display “Operator Setup” sub menu. (Refer to Step 1 to

4 of p. 51 To Recall Menu Functions.)

2. Select an operator to register or change the settings by

performing either of the following.

• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.

Note:

When registering a new operator, select an oper-

ator number beside which “No Assign” is displayed.

3. Press the ENTER or CAM (SET) button.

“User ID” setting menu will appear on the LCD.

Operator07 404

User ID= 1

Operator07 404

User ID= 777

Operator07 404

Function Level = 1

Operator07 404

Function Level = 2

Operator01 404

Level1 Fixed

Operator07 404

Camera Level = 1

Operator Setup 404

Operator01

Operator Setup 404

Operator02

Operator Setup 404

Operator07 No Assign

Auto Login/out 403

Cont No.6 Clear OK?

Auto Login/out 403

Cont No.6 Erased

Operator07 404

Password= 12345

Operator07 404

Password= 333

Содержание WVCU650 - SYSTEM CONTROLLER ADDENDUM































































































































Результаты поиска

Содержание WVCU650 - SYSTEM CONTROLLER ADDENDUM

Отзывы:

Похожие инструкции для WVCU650 - SYSTEM CONTROLLER ADDENDUM

Бренды по названию

Популярные бренды

Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM, Руководство по эксплуатации

Результаты поиска

Содержание WVCU650 - SYSTEM CONTROLLER ADDENDUM

Отзывы:

Похожие инструкции для WVCU650 - SYSTEM CONTROLLER ADDENDUM

Бренды по названию

Популярные бренды