■
Disassembling the Camera
1. Remove the top cover.
Loosen three fixing screws of the top
cover, and remove them.
●
To mount the camera directly on
the wall/ceiling
1. Prepare the mounting space.
2. Place the camera on the wall/ceiling and
mark four screw positions with a pen.
3. Mount the camera on the wall/ceiling
with 4 screws (procured locally).
4. Fasten all the mounting screws.
●
To mount the camera on a two-
gang junction box
1. Install the two-gang junction box on the
wall/ceiling.
2. Mount the camera on the two-gang junc-
tion box with 4 screws (procured local-
ly).
3. Fasten all the mounting screws.
46mm {1.81"}
83.5mm
{3.29"}
Camera mounting screw x4
(not supplied)
12
Mounting place
Ceiling/wall
Model
(direct mounting)
Recommended
screw
M4
Number of
screws
4 pcs.
Minimum pull-out
strength (per 1 pc.)
196 N {44.1 lbf}
The mounting requirements are shown as follows.
■
Connections
●
Video output connection
Important:
• When connecting the coaxial cable to
the video output connector, make sure
that the connector of the coaxial cable is
locked firmly.
Connect the video output connector to the
monitor or other system devices with the
procured coaxial cable.
The maximum extensible cable length is
shown in the table.
TOP
LOCK
B.S
BLC
ALC
ELC
D/N
ON
OFF
AF
MONITOR
Video output connector
Power cable
