Panasonic WV-U1100 Series Скачать руководство пользователя страница 153

Страница: 153 / 184

Checking the information registered for the “Viewnetcam.com” service

It is possible to check if the camera has been registered for the “Viewnetcam.com” service. (

page 164)

2.8.6.2 When using “Dynamic DNS Update”

[Host name]

Enter the host name to be used for the Dynamic DNS Update service.

•

Available number of characters:

3 - 250 characters

Enter in the form of “(host name). (domain name)”.

•

Available characters:

Alphanumeric characters, the period (.), and the hyphen (-).

•

Default:

None (blank)

Note

•

Refer to the network administrator for further information about the available host names.

[Access interval]

Select the interval to access the Dynamic DNS Update service server to check the IP address and the host
name from the following.
10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h

•

Default:

24h

Operating Instructions

153

2 Settings

Содержание WV-U1100 Series

























































































































































































Результаты поиска

Содержание WV-U1100 Series

Отзывы:

Похожие инструкции для WV-U1100 Series

Бренды по названию

Популярные бренды

Panasonic WV-U1100 Series, Руководство по эксплуатации

Результаты поиска

Содержание WV-U1100 Series

Отзывы:

Похожие инструкции для WV-U1100 Series

Бренды по названию

Популярные бренды