•
Outdoor scene:
Depending on the brightness level (illuminance), the iris will automatically be controlled
together with the shutter speed adjustment to control light. When shooting a bright subject such as outdoor,
etc., select this parameter. Be aware that flicker may occur when a subject is under fluorescent lighting.
•
Indoor scene (50 Hz) / Indoor scene (60 Hz):
The shutter speed will automatically be adjusted to prevent
flicker caused by fluorescent light. Select 50 Hz or 60 Hz corresponding to the location where the camera
is in use.
•
ELC
SP509
SP509
SP508
SP508
:
The shutter speed is used to control the light.
•
Fix shutter:
The selected value will be set as the fixed shutter speed.
1/30 Fix, 3/100 Fix, 3/120 Fix, 2/100 Fix, 2/120 Fix, 1/100 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix, 1/1000 Fix,
1/2000 Fix, 1/4000 Fix, 1/10000 Fix
•
Default:
Outdoor scene
Note
•
When a faster shutter speed is selected (up to 1/10000), it is possible to capture a fast moving object
with less blur.
•
When a faster shutter speed is selected, the sensitivity will become lower.
•
When “On” is selected for “Super Dynamic(SD)”, “ELC” and “Fix shutter” are not available. To configure
“ELC” and “Fix shutter”, set “Super Dynamic(SD)” to “Off”.
SP509
SP509
•
Select “ELC” when using a lens with fixed iris or manual iris.
[AGC]
Select a method of gain adjustment from the following.
•
On(High)/ On(Mid)/ On(Low):
When the luminance of the subject becomes darker, gain will be
automatically increased and screen will become brighter. “High”, “Mid” and “Low” are indications of gain
level.
•
Off:
Images will be captured with the fixed gain level.
•
Default:
On(High)
[Auto slow shutter]
The electronic sensitivity enhancement (sensitivity up) can be carried out by adjusting the storage time of the
sensor.
The following are available for the recording duration.
Off(1/30s), Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
•
Default:
Off(1/30s)
IMPORTANT
•
When “On” is selected for “Auto slow shutter”, frame rate may become lower. Noise or white dots
(blemishes) may sometimes appear.
Note
•
When “Max.16/30s” is selected, for example, sensitivity will automatically be increased up to x16.
•
When “Off” is selected for “AGC”, this setting is unavailable.
[Day & Night(IR)]
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
Select switching between the color mode and the black & white mode from the following.
•
Off:
The color mode is selected.
•
On:
The black & white mode is selected.
•
Auto1(Normal):
The camera automatically switches between the color mode and the black & white mode
in accordance with picture brightness (luminance). The black & white mode will automatically be selected
when the lighting condition becomes darker, while the color mode will automatically be selected when it
becomes brighter.
•
Auto2(IR Light):
Suitable when using near-infrared light source at night.
Operating Instructions
95
11 Configure the settings relating to images and audio [Image/Audio]
Содержание WV-SW550 Series
Страница 58: ...58 Operating Instructions 10 Configure the basic settings of the camera Basic...
Страница 173: ...5 Click Finish Operating Instructions 173 18 Configuring the network settings Network...
Страница 214: ...214 Operating Instructions Notes...
Страница 215: ...Operating Instructions 215 Notes...