![background image](http://html1.mh-extra.com/html/panasonic/wv-sw550-series/wv-sw550-series_operating-instructions-manual_4719032127.webp)
The settings relating to Panasonic alarm protocol can be configured in this section.
Panasonic alarm protocol notification
[Panasonic alarm protocol]
Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according
to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
–
When an alarm is detected (“Alarm”)
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
:
–
When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
–
When the SD memory card has become full (“Diag.”)
–
When the SD memory card cannot be recognized (“Diag.”)
•
Default:
Off
Note
•
When “On” is selected, notification of the alarm occurrence will be provided to the registered destination
server addresses in order (to IP address 1 first, to IP address 8 last).
Operating Instructions
127
13 Configure the alarm settings [Alarm]
Содержание WV-SW550 Series
Страница 58: ...58 Operating Instructions 10 Configure the basic settings of the camera Basic...
Страница 173: ...5 Click Finish Operating Instructions 173 18 Configuring the network settings Network...
Страница 214: ...214 Operating Instructions Notes...
Страница 215: ...Operating Instructions 215 Notes...