Panasonic WV-SW550 Series, Руководство по эксплуатации

Страница: 60 / 216

•
Due to the difference in file formats, the indication of remaining capacity of the SD memory card differs
between the cases when “JPEG” is selected and when “H.264(1)” or “H.264(2)” is selected for
“Recording format”.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the following settings in “H.264
recording”; Image capture size, Frame rate, Control time period, Max bit rate, Image quality, and
Refresh interval will be read from the settings in “H.264(1)” or “H.264(2)”.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the settings of the following functions
may be corrected.
–
When “Best effort” is selected for “Transmission priority”, “Frame rate” is set.
–
When “High” or “Middle” is selected for “Burst tolerance level”, “Low” is set.
–
When “2s”, “3s”, “4s” or “5s” is selected for “Refresh interval”, “1s” is set.
–
When “3072kbps”, “4096kbps”, “6144kbps”, “8192kbps”, “10240kbps”, “12288kbps” or
“14336kbps” is selected for “Max bit rate”, “2048kbps” is set.
•
When the selection for “Recording format” is changed to “H.264(1)” or “H.264(2)”, the setting of “Save
logs” (the [Log] tab on the “Basic” page
®
page 75) is changed together.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, alarm images are saved in
accordance with the settings of “Pre alarm” and “Post alarm (recording) duration” on the [Alarm] tab of
the “Alarm” page.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the name of the saved file will be
given automatically.
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the number of users that can access
the camera may be reduced.
•
When “Image capture mode” is selected for “3 mega pixel [4:3]”, “H.264(2)” is unavailable.
Common
[Remaining capacity notification]
When the E-mail notification function or the Panasonic alarm protocol function is used to provide notification
of the remaining capacity of the SD memory card, select a level to be notified at from the following.
50%/ 20%/ 10%/ 5%/ 2%
•
Default: 50%
Note
•
Notification will be provided each time the remaining capacity of the SD memory card reached the
values above.
For example, notification will be provided each time the remaining capacity reaches 50%, 20%, 10%,
5% and 2% when “50%” is selected. Notification may not always be made at the very moment when
the remaining capacity of the SD memory card has reached each value.
[Save trigger]
Select a trigger to save images on the SD memory card from the following.
•
FTP error: Saves images when images have failed to transmit to the FTP server by the FTP periodic image
transmission function. Available only for JPEG images.
•
Alarm input: Saves images at an alarm occurrence.
•
Manual: Saves images manually.
•
Schedule: Saves images in accordance with the settings for “Schedule” (
®
page 185). Available only for
H.264 images.
•
Default: FTP error
Note
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, “FTP error” is unavailable.
•
Select “FTP error” when images are to be transmitted to the FTP server at an alarm occurrence.
60 Operating Instructions
10 Configure the basic settings of the camera [Basic]