Panasonic WV-SPW311AL, Важная информация

Страница: 18 / 32

18
Heater unit
This product is equipped with an internal heat-
er unit for use in cold climates. The heater unit
turns on automatically when the temperature
inside the product drops below around 0 °C
{32 °F}. However, in an extremely low-temper-
ature environment below –20 °C {–4 °F}, snow
and frost may not be defrosted from the dome
cover. When using the product in cold cli-
mates, take notice of the ambient and internal
temperatures of the product. When this prod-
uct is installed and operated in low tempera-
tures below –20 °C {–4 °F}, normal images
may not be obtained immediately after startup.
In such a case, wait until the internal tempera-
ture of the camera rises (for around 2 hours or
more in temperatures below –20 °C {–4 °F}),
turn the power off once, then turn it back on
again.
Protection from lightning
When cables are used outdoors, there is a
chance that they may be affected by lightning.
In such a case, install a lightning arrestor close
to the camera, and make the length of the net-
work cable between the camera and lightning
arrestor as short as possible to prevent the
camera from being damaged by lightning.
Radio disturbance
When this product is used near TV/radio
antenna, strong electric field or magnetic field
(near a motor, a transformer or a power line),
images may be distorted and noise may be
produced.
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with
IEEE802.3af standard.
Router
When connecting this product to the Internet,
use a broadband router with the port forward-
ing function (NAT, IP masquerade).
Refer to the Operating Instructions on the pro-
vided CD-ROM for further information about
the port forwarding function.
Ethernet cable
Shielded (STP) Ethernet cables must be used
with this unit to ensure compliance with CE
standards.
Time & date setting
It is necessary to set the time & date before
putting this product into operation. Refer to the
Operating Instructions on the provided
CD-ROM for descriptions of how to perform
the settings.
Make sure to remove this product if it will
no longer be used.