![background image](http://html.mh-extra.com/html/panasonic/wv-spw311al/wv-spw311al_important-information-manual_1511939012.webp)
12
Turn the power off when cleaning this
product.
Failure to observe this may cause injury.
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.
[Precautions for use]
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. Do not expose this
product to direct heat sources such as a heater.
This product has no power switch.
SPW531L
SPW311L
When turning off the power, disconnect the
power supply from the 12 V DC power supply
or the PoE device.
SPW532L
SPW312L
When turning off the power, disconnect the
power supply from the PoE device.
Before turning off the camera power switch,
make sure that the SD MOUNT indicator
(green) is turned off. If you turn off the camera
power switch while the SD MOUNT indicator
(green) is lit or flashing, the recorded data may
be corrupted or damaged.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble.
About the battery
A battery is installed inside the camera. Do not
leave the battery exposed in environments of
excessive heat as a result of sunlight or fire.
Do not subject front cover to strong impact.
Doing so may cause damage or immersion.
About the PC monitor
When displaying the same image on the monitor
for a long time, the monitor may be damaged.
It is recommended to use a screen-saver.
When an error is detected, this product
will restart automatically.
This product will be inoperable for around
2 minutes after the restart just as when the
power is turned on.
About the automatic status detection
function
When this product malfunctions due to exoge-
nous noise, etc. for 30 seconds or more, the
product will automatically reset and will return
to normal state. When the product is reset, ini-
tialization will be carried out as when the power
of the product is turned on. When the product
repeatedly resets, exogenous noise level
around the product may be high and that may
cause malfunction. Contact your dealer for
instructions.
Transmission interval
Image transmission interval may become slow
depending on the network environment, PC
performance, shooting subject, access num-
ber, etc.
Periodically images on the screen appear
to be distorted
When the camera is installed in a location
where it is subject to small vibrations (for exam-
ple, when it is installed near devices that
vibrate), images may appear distorted and
stretched lengthways. This phenomenon is a
characteristic of image pickup devices that use
MOS sensors and is caused by the relationship
between the periodic movements of the cam-
era and the timing that the image sensor reads
images. This is not a problem with the camera.
To reduce the possibility of this phenomenon
occurring, install the camera in a secure loca-
tion.
Содержание WV-SPW311AL
Страница 31: ...31 ...