![background image](http://html1.mh-extra.com/html/panasonic/wv-sp509/wv-sp509_installation-manual_4161496028.webp)
28
When using PoE (IEEE802.3af compliant)
Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)
and the network connector of the camera.
* For Europe.
IMPORTANT:
• Use all 4 pairs (8 pins) of the LAN cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply. Depending on the PoE device used, the power supply lamp
may not light and the network connections may not be possible. In this case, disable the PoE
device setting, and refer to the operating instructions of the PoE device in use.
• When disconnecting the LAN cable once, reconnect the cable after around 2 seconds. When
the cable is quickly connected, the power may not be supplied from the PoE device.
Connection example when connecting to a network using a
PoE hub
<Required cable>
LAN cable (category 5 or better, straight, STP*)
* For Europe
IMPORTANT:
• The video monitor is used for checking the adjustment of the angular field of view when install-
ing the camera or when servicing. It is not provided for recording/ monitoring use.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• Power supply is required for each network camera. When using a PoE device (hub), 12 V DC
power supply is unnecessary.
PoE device (hub)
PC
6SHDNHUZLWKDPSOLƄHURSWLRQ
0LFURSKRQHRSWLRQ
)
6SHDNHUZLWKDPSOLƄHURSWLRQ
0LFURSKRQHRSWLRQ
)
9LGHRPRQLWRUIRU
DGMXVWPHQWXVHRQO\
9LGHRPRQLWRUIRU
DGMXVWPHQWXVHRQO\
/$1FDEOHFDWHJRU\
or better, straight, STP*)
/$1FDEOHFDWHJRU\RU
better, straight, STP*)
LAN cable
FDWHJRU\RUEHWWHUVWUDLJKW673
SP509
SP509
SP509
SP509