background image

selecting “Auto” or “Preset” for “Adjusting method” (the focus will not automatically be adjusted
according to the illumination level change once the focus is corrected).

[Adjusting method]

Select the focus adjustment method upon switching between the color mode and the black & white mode.

Auto:

 Adjusts the focus function automatically and corrects the focus when switching between color and

black & white images.

Preset:

 Performs the preset movement to each specified focus position when switching between color and

black & white images. The preset position is the focus position specified last time, which was automatically
memorized for each of color images and black & white images.

Fix:

 Fixes the position after adjusting the focus either automatically or manually.

Default:

 Auto

[Close] button

Click this button to close the “Zoom/Focus adjustment” setup menu.

11.7  Configure the preset positions (Preset position
setup menu)

Click the [Setup>>] button of “Preset position” on the [Image/Position] tab of the “Image/Audio” page
(

®

Page 78).

It is possible to register, edit and delete the preset positions on this page.
When the position and zoom factor are adjusted, the adjustment will be applied immediately to the currently
displayed image on the [Image/Position] tab.

IMPORTANT

This function is available when “Cropping [16:9](30fps mode)” is selected for “Image capture mode”
and “On” is selected for “H.264 transmission” of “H.264(1)”. (

®

Page 77).

92

Operating Instructions

11 Configure the settings relating to images and audio [Image/Audio]

Содержание WV-SFV781L









































































































































































































Отзывы: