17
1
Use a slotted head screwdriver to open the screw covers
(2 places), and then use a cross slot screwdriver to loos-
en the 2 enclosure fixing screws.
2
Remove the enclosure.
• Hold both sides of the enclosure, remove the enclosure.
Using the side cable access hole
When installing the camera directly on the ceiling or
wall with cabling from the side of the camera, cut out
the protruding part of the enclosure and use a file or
other tool to open a cable access hole of the same
width of the protruding part and a depth of 5 mm.
IMPORTANT:
• To prevent injury and protect cables, smooth opened cable access holes of the enclosure
with a file or other tool.
Screw cover
Protruding part
