22
IMPORTANT:
• When inserting an SD memory card, make sure the direction.
• Before removing the SD memory card, select “Not use” for “SD memory card” on the [SD
memory card] tab of the “Basic” page first. Turn off the power after “Not use” selection, and
then unload the SD memory card. When the SD memory card is inserted or removed with the
power on, data in the SD memory card may be damaged.
(
☞
Operating Instructions (included in the CD-ROM))
z
Open the SD memory slot cover.
Loosen the SD memory card slot cover fixing screw with
the bit for tamperproof screw (accessory), then open the
SD memory card slot cover by using the notched area.
IMPORTANT:
• Do not use excessive force when opening SD
memory cards out from the SD memory card slot.
Failure to observe this may damage the SD memory
card slot cover.
x
Insert an SD memory card fully into the SD memory card
slot until a click is heard.
c
Attach the SD memory card slot cover, and tight-
en the SD memory card slot fixing screw to
secure the cover.
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
v
When removing the SD memory card, push in
the SD memory card until a click is heard after
executing step 1, then pull it out from the SD
memory card slot. After opening the SD memory
card, attach the SD memory card slot cover, and
tighten the SD memory card slot cover fixing
screw to secure the cover.
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
Insert/remove an SD memory card
SD memory card slot cover
fixing screw
SD memory card slot cover
Label face upward
SD memory card slot
