![background image](http://html.mh-extra.com/html/panasonic/wv-sc588/wv-sc588_installation-manual_277973029.webp)
Symptom
Cause/solution
Reference
pages
Live indicator keeps on
blinking orange approx. in 2
seconds intervals.
• UPnP
TM
error has occurred since the power is not supplied to the
router.
Turn on the power of the router. Wait until the connections are
established.
−
• An error has occurred during the port update by the UPnP func
-
tion.
If the router in use does not support the UPnP function, perform
the port forwarding setting for the router. In addition, deactivate the
setting of auto port forwarding for the camera.
Operating
Instructions
(included in
the CD-ROM)
• UPnP function of the router is disabled.
Refer to the operating instructions of the router to enable the
UPnP function.
−
Live indicator never lights up.
• Is “Off” selected for “Link/Access LED” on the “Basic” page?
Select “On” or “On(Access)” for the indicator setting.
Operating
Instructions
(included in
the CD-ROM)
Live indicator keeps on
blinking red.
• The camera may be out of order.
Contact your dealer.
• Refer to the readme file on the provided CD-ROM for further infor
-
mation after checking the displayed contents of the “Maintenance”
page - the [Status] tab - “Self check” of the setup menu.
−
Live indicator lights red.
• Isn’t the write protect switch of the inserted SD memory card set
to “LOCK”?
Unlock the write protect switch of the SD memory card.
• Hasn't the inserted SD memory card been formatted on a PC?
Use an SD memory card formatted on the camera.
Or install the software to format the SD memory card on the PC.
Refer to our website
(http://security.panasonic.com/pss/security/support/info.html)
for further information about the supported software.
• Isn't the inserted SD memory card faulty?
Replace the card with a normal one.
Operating
Instructions
(included in
the CD-ROM)
Audio input contains noise.
• Check the following.
• Grounding of the camera, a switching hub or peripheral devices
are not done.
• The camera is used near an electrical power line.
• The camera is used near a device which produces strong mag
-
netic field or radio waves (such as near a TV/radio antenna, a
motor of an air conditioning system, a transformer, etc.)
When audio input still contains noise even after checking the
above possibilities, use a powered microphone or connect audio
output with low output impedance.
12
29