Panasonic WV-SBV131M, Руководство по эксплуатации

Страница: 81 / 200

•
Off : The wide dynamic range will not work.
•
Default : Off
Note
•
When the following are observed depending on the light condition, select “Off” for “Wide dynamic range
(WDR)”.
–
When flickering appears or the color changes on the screen
–
When noise appears in the brighter area on the screen
[Adaptive black stretch]
Select “On” or “Off” to determine whether or not to activate the darkness compensation function. The darkness
compensation function can make darker parts of images brighter by digital image processing.
•
On: Activates the darkness compensation function.
•
Off: Deactivates the darkness compensation function.
•
Default: On
IMPORTANT
•
When “On” is selected for “Adaptive black stretch”, noise in the darker parts may be increased, and
parts around borders between the darker parts and the brighter parts may become darker/brighter than
the other darker/brighter parts.
Note
•
When “On” is selected for “Wide dynamic range (WDR)”, “Adaptive black stretch” is unavailable.
[Back light compensation (BLC)]
Select “On” or “Off” to determine whether or not to activate the back light compensation (BLC) function. When
“On” is selected for “Wide dynamic range (WDR)”, this setting is unavailable.
The back light compensation function can compensate back light by setting mask areas on brighter parts of
images.
•
On: Mask areas will be set automatically.
•
Off: Mask areas will not be set automatically. It is necessary to set them manually.
•
Default: Off
[Mask area]
When “Off” is selected for “Wide dynamic range (WDR)” and “Back light compensation (BLC)”, it is possible to
compensate for backlight by masking brighter areas.
Refer to page 84 for information on how to set the mask area.
[Light control mode]
Select the light control mode from the following.
•
Indoor scene (50 Hz) / Indoor scene (60 Hz): The shutter speed will automatically be adjusted to prevent
flicker caused by fluorescent light. Select 50 Hz or 60 Hz corresponding to the location where the camera
is in use.
•
ELC: Uses shutter speed adjustment to control light.
•
Default: ELC
[AGC]
Select a method of gain adjustment from the following.
•
On(High)/ On(Mid)/ On(Low): When the luminance of the subject becomes darker, gain will be
automatically increased and screen will become brighter. “High”, “Mid” and “Low” are indications of gain
level.
•
Off: Images will be captured with the fixed gain level.
•
Default: On(Mid)
Operating Instructions 81
11 Configure the settings relating to images [Image]