Panasonic WV-SBV131M, Руководство по эксплуатации

Страница: 33 / 200

7.2 Playback “H.264(1)”/“H.264(2)”/“H.264(3)”/“H.
264(4)” images saved to the SD memory card
IMPORTANT
•
Depending on the network environment, download of video data may fail.
A
Slider bar
By operating the slider bar, you can select where to start playing images from. The slider bar can only be
used before playing images, or when playing is paused or stopped.
[PAUSE] button
Playback will be paused when this button is clicked during playback.
[PLAY] button
When this button is clicked, recorded data will be played.
[FF] button
Each time this button is clicked, the playback speed will change. When the [PLAY] button is clicked during fast
playback, playback speed will return to the normal playback speed.
Note
•
The maximum speed of the fast playback varies depending on the setting of “Max bit rate” - “H.264
recording” of the SD memory card. If any of the following also applies to “Transmission priority” or “Max
bit rate (per client)” on the [JPEG/H.264] tab of the “Image” page, playback speed becomes constant
(x1), not fast playback.
–
When “Frame rate” or “Advanced VBR” is selected for “Transmission priority”, and “14436kbps” or
a higher value is selected for the maximum value of “Max bit rate (per client)”
–
When “Constant bit rate” is selected for “Transmission priority”, and “16384kbps” is selected for
the maximum value of “Max bit rate (per client)”
[5s backward] button
Each time this button is clicked, the recorded data goes back by 5 seconds and starts playing.
Operating Instructions 33
7 Playback of images on the SD memory card