Panasonic WV-S1100 Series, Руководство по эксплуатации

Страница: 66 / 236

•
Depending on the photographic conditions such as in the following situations, images may not be able
to be effectively stabilized.
–
When subjects are dark
–
When subjects have little contrast, such as walls with a single color
–
Subjects with short-cycled image shaking, such as mechanical vibration
–
Subjects with large-amplitude image shaking
•
When capturing images of large subjects that are moving, stabilization may malfunction.
Note
•
If there is shaking in dark environments, image stabilization can become more effective by using a
high-speed shutter setting of “Max. 1/100s” or more for “Maximum shutter”. Configure “Maximum
shutter” according to the installation environment.
[Indicator]
Determine whether or not to use the following indicators. Select “On” to use the following indicators to check
the operational status by lighting them.
–
Link indicator (LINK)
–
Access indicator (ACT)
–
SD memory card error indicator/Auto focus indicator (SD ERROR/AF)
S253x S213x S251x
S211x
–
SD memory card error indicator/ABF indicator (SD ERROR/ABF)
S113x S111x
•
Default: On
Note
•
Link indicator (LINK) (orange): This indicator will light when communication with the connected
device is available.
•
Access indicator (ACT) (green): This indicator will blink when accessing a network.
•
SD memory card error indicator/Auto focus indicator (SD ERROR/AF) (red)
S253x S213x
S251x S211x
: Lights when data cannot be saved to the SD memory card. Also, when the auto
focus function is used, the indicator flashes during focus adjustment and turns off when the adjustment
is completed.
•
SD memory card error indicator/ABF indicator (SD ERROR/ABF) (red)
S113x S111x
: Lights
when data cannot be saved to the SD memory card. Also, when the auto back focus function is used,
the indicator flashes during focus adjustment and turns off when the adjustment is completed.
[Status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button, [AUX] button
S11x2
S11x1 S25x1 S21x1
, or the SD saving status indicator will be displayed in the “Live” page to notify of
the camera status.
•
Polling(30s): Updates the status each 30 seconds and provide notification of the camera status.
•
Real time: Provide notification of the camera status when the status has changed.
•
Default: Real time
Note
•
Depending on the network environment, notification may not be provided in real time.
•
When multiple cameras are using the same “Status reception port”, even if “Real time” is selected for
“Status update mode”, status notification is not provided in real time. In this case, change the “Status
reception port” settings.
66 Operating Instructions
2 Settings