For mounting on wall
<Required camera mount bracket and safety wire kit>
• Camera mounting plate: WV-831
• Safety wire kit: WV-Q140
z
Put the tripod mount base on the bottom of the camera.
Secure the safety wire lug for wall (acces-
sory) to the camera mount screw hole with
the fixing screw (accessory).
Important:
• Be sure to use the provided fixing screws
and the removed screws to attach the tri-
pod mount base.
When using different length screws, it may
damage the camera or cause the camera
to fall.
(Recommended tightening torque:
0.39 N·m)
x
Engage the safety wire with the wire engaging hole.
19
Wire engaging hole
Safety wire
Connection hook
T
W
Wire engaging
hole
Fixing screw
hole
Fixing screw
(accessory)
Safety wire lug
for wall
(accessory)
* Leave these holes
untouched.
Exhaust port
Tripod mount base
Mounting screws
q
Pass the ring part of the safety wire
through the wire engaging hole.
w
Pass the connection hook through the ring
part of the safety wire.
Important:
• Use caution to prevent the safety wire from entering into the exhaust port.
