14
Major operating controls and their functions
<Side view>
<Rear view>
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Before initializing the settings, it is recommended to write down the settings in
advance.
W
ABF
SDCARD LOCK
W
Lens (option)
ALC lens connector
Tripod mount base
Auto-back-focus button
Slide cover
Clamp for SDHC/SD memory card
SDHC/SD memory card slot
POWER
10BASE T/100BASE-TX
AUDIO OUT
MIC/LINE IN
EXT I/O
SD CARD/ABF
MONITOR OUT
ACT
LINK
12V = IN
GND 4 3 2 1
INITIAL
SET
ALARM IN 1/DAY/NIGHT IN
ALARM IN 3/
AUX OUT/EXPOSURE OUT
ALARM IN 2/ALARM OUT
12 V DC power cable terminals
Monitor for adjustment
Output connector
Power LED
Access LED (blinking at accessing)
Link LED (lighting at linking)
Network connector
Audio output connector
EXT I/O terminals
INITIAL SET button
Microphone/line input connector
SDHC/SD memory card error
LED/ABF LED (Blinks when
ABF is being performed.)
