16
Setting item
Note:
• The respective setting items are allowed to set up different values in regard to each input signal. However, the same values
are used in common for the video input B and S-video input.
• "TINT" can be adjusted only if the input signal is of the NTSC system.
3. Move the cursor to the following setting items by pressing the
C
or
D
button. Then, adjust the levels by pressing the + or –
button.
Note:
Value can be set differently for each input signal.
4. To reset the settings, move the cursor to NORMAL SETTINGS by pressing the
C
or
D
button. Press the MENU button.
The currently displayed input signal (VIDEO A, VIDEO B, or S-VIDEO) currently selected will be reset to the factory default.
5. To return to the top menu, move the cursor to EXIT by pressing the
C
or
D
button. Then, press the MENU button.
6. After returning to the top menu, move the cursor to EXIT by pressing the
C
or
D
button. Then, press the MENU button.
The monitor display return to the default status.
Note:
If no operation has been performed for 10 seconds or more, the monitor display returns to the default status.
Effect
Setting value
BRIGHTNESS
CONTRAST
+:
Contrast level goes up.
–:
Contrast level goes down.
–20 to +20
SHARPNESS
+:
Picture quality becomes sharper.
–:
Picture quality becomes softer.
–7 to +7
COLOR
+:
Color density level goes up.
–:
Color density level goes down.
–20 to +20
TINT (NTSC system only)
H-POSITION
COLOR TEMP
SCAN
+:
Tint becomes more greenish.
–:
Tint becomes more reddish.
+:
Position is moved to the right.
–:
Position is moved to the left.
–20 to +20
–10 to +10
6500K: Reddish color is intensi-
fied (default).
9300K: Blue color is intensified.
FULL:
The overall video image is dis-
played throughout the screen.
The aspect ratio of the video
image is disregarded and the
displayed image appears
somewhat slender.
OVER:
The screen height and the
image height are joined to dis-
play. Since the enlarged
aspect ratio remains to be 1:1,
the right and left parts of the
image are slightly lost.
UNDER:
The screen width and the
image width are joined to dis-
play. Since the enlarged
aspect ratio remains to be 1:1,
black strips are displayed in
the top and bottom parts of
the image.
+:
Brightness level goes up.
–:
Brightness level goes down.
–20 to +20
