2-3
8
Referring to Fig. 2-7, remove two screws that secure the
Front Unit and remove the Front Unit from the Main Unit
of the Camera.
8
Disconnect the connector CN1 on the Main Board and
remove the Flexible Flat Cable.
8
Disconnect the connector CN3 on the Main Board and
remove the Wire Ass'y.
CN1
CN3
Main Board
Main Unit of
the Camera
Remove two screws.
Wire Ass'y
Front Unit
Fig. 2-7
8
Referring to Fig. 2-8, remove two screws that secure the
Main Board and remove the Main Board from the Main
Unit of the Camera.
8
Reconnect the Wire Ass'y of the Raer Esutcheon to CN6
on the Power 2 Board.
8
Reconnect the Wire Ass'y of the Raer Esutcheon to CN1
on the Power 1 Board.
8
Reconnect the Flexible Flat Cable and the Wire Ass'y of
the Front Unit to CN1 and CN3 on the Main Board.
Main Board
Main Unit
of the Camera
Fig. 2-8
Fig. 3-1
3. Optical Ass'y Replacement
Procedure
8
Remove the Front Unit from the Camera while referring to
the item 2. Disassembling Procedure for Adjustment.
8
Referring to Fig. 3-1, remove two screws that secure the
Sensor Board and remove the Sensor Board from Front
Unit.
8
Disconnect the connector CN300 on the Sensor Board
and remove the Wire Ass'y.
8
Remove the Optical Ass'y (IC20) from the Sensor Board.
Remove
two screws.
Optical Ass'y (IC20)
CN300
Wire Ass'y
Front Unit
Flexible Flat Cable
Remove two screws.
Sensor Board
