1
Push the tab in the square hole on the cam-
era with a tapered tool such as tweezers.
With maintaining this state, rotate the
dome fix ring counterclockwise, removing
the dome fix ring and dome cover.
2
Align the hook on the dome cover
(smoke type) and the grappling hole on
the camera, installing the dome cover.
-
Note-
Remove the edge of the protective sheet temporarily.
It may prevent the dome fix ring from being
installed.
Leave the protective sheet attached until you
install the camera after fixing the dome ring
in order to prevent the dome from being
damaged or getting dust.
3
Install the dome fix ring.
Align the
▼
inside of the dome fix ring
and the arrow of the camera, inserting
the dome fix ring.
Then turn it clockwise, fixing the dome
fix ring.
-
Important-
Turn the dome fix ring to the left and right to
make sure it's firmly fixed.
Also make sure the tab is placed properly in
the square hole.
Failure to fix it properly may drop the dome cover.
4
Install the camera.
See the camera installation guide for fur-
ther information.
MOUNTING PROCEDURES
2
Dome Fix Ring
Dome Fix Ring
Square hole
Dome Cover
Tab
Camera
1
Remove
3
Remove
4
Rotate
2
Push
Push
Insert
Align the position
1
Protective sheet
Hook
Grappling hole
Install
Camera
