![background image](http://html.mh-extra.com/html/panasonic/wv-cl920a-series/wv-cl920a-series_operating-instructions-manual_277782027.webp)
The preset values for SHUTTER (electronic shutter
speed) change by pressing
L
or
M
as follows:
4. Gain Control Setting (AGC ON/OFF)
You can select an automatic gain control (AGC) mode
with dynamic noise reduction (DNR) options.
1. Move the cursor to AGC and select a mode.
OFF:
Applies neither AGC nor DNR.
ON (DNR-H):
Applies AGC with high-level DNR.
ON (DNR-M):
Applies AGC with middle-level DNR.
ON (DNR-L):
Applies AGC with low-level DNR.
-28-
2-3. Compensating Flare Phenomenon (PEAK MODE)
There may be cases where the lens causes the dis-
played picture to sway like a flare especially when a
strong light is input. You can compensate for this unde-
sired effect.
Move the cursor to PEAK MODE, and select ON or OFF.
ON:
Compensates flaring of the picture.
OFF:
Does not compensate.
3. Shutter Speed Setting (SHUTTER)
Note:
When ELC is selected for ALC/ELC on the CAM
SET UP menu, this item is not available.
You can select an electronic shutter speed of 1/60
(OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, or
1/10 000 seconds.
Move the cursor to the SHUTTER parameter and select
the electronic shutter speed.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON(DNR-H)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC
END SET UP ENABLE
↵
↵
↵
↵
OFF (1/60)
1/100
1/10 000
1/4 000
1/2 000
1/1 000
1/250
1/500
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON(DNR-H)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC
END SET UP ENABLE
↵
↵
↵
↵