![background image](http://html.mh-extra.com/html/panasonic/wv-cl920a-series/wv-cl920a-series_operating-instructions-manual_277782010.webp)
-10-
q
Auto Iris Lens Connector
This connector is used to connect the auto iris lens
with a 4-pin male connector supplied as a standard
accessory (Part No. YFE4191J100).
w
Flange-back Adjusting Ring (FB)
This ring is used to adjust the back focal length or
picture focus. Rotate this ring upward or downward
for a CS-mount lens. In case of using a C-mount
lens, adjust it with the C-mount adapter.
e
Lens (Option)
r
Focus Fixing Screw (LOCK)
t
Camera Mounting Screw Hole
This hole is used to mount the camera onto a
mounting bracket.
y
Down Button (
K
)
This button is used to move the cursor downward. It
is also used to select items in the CAM SET UP
menu.
u
Right Button (
M
)
This button is used to move the cursor to the right.
It is also used to select the mode and can be used
to adjust some levels.
i
Left Button (
L
)
This button is used to move the cursor to the left. It
is also used to select the mode and can be used to
adjust some levels.
o
Up Button (
J
)
This button is used to move the cursor upward. It is
also used to select items in the CAM SET UP menu.
!0
Set Button (
I
)
This button is used to activate an item selected in
the CAM SET UP menu.
!1
Gen-lock Termination Switch (Hi-Z, G/L 75
Ω
)
Set this switch to Hi-Z when a gen-lock video input
signal is looped through. In all other cases, set this
switch to 75
Ω
.
!2
Gen-lock Input Connector (GEN-LOCK)
This connector is used to connect an external sys-
tem for synchronization.
!3
Video Output Connector (VIDEO OUT)
This connector is used to connect with the VIDEO
IN connector of the monitor.