19
Camera system setting [SYSTEM SETUP]
Performs the settings relating to the camera system such as synchronization, and privacy zone.
The following settings can be configured on the "SYSTEM SETUP" screen displayed from the
top screen. Refer to page 5-6 for how to call up the screen.
"SYSTEM SETUP" screen
RET TOP END
ABF PUSH
SYNC
PRIVACY ZONE
STABILIZER
EL-ZOOM
UPSIDE-DOWN
OFF
INT
OFF
OFF
OFF
I...... 0
- +
LDC
FOCUS
RET TOP END
**SYSTEM SETUP**
@
Synchronization method selection [SYNC]
This unit supports the following 2 types of synchronization methods, and one of the following is
selected.
(1) Multiplexed vertical drive signal (VD2)
(2) Internal synchronization (INT) (default)
Input of a multiplexed vertical drive signal (VD2) automatically switches to the VD2
synchronization even if the camera is set to other than the VD2 synchronization method.
When the VD2 synchronization is not selected, or internal synchronization can be selected.
A
Privacy zone setting [PRIVACY ZONE]
When undesired portions in the camera shooting area (on the screen) exist, those portions (pri-
vacy zone) can be set to be hidden. Up to 8 portions can be specified for the privacy zone.
ON (1): Grays the zone.
ON (2): Mosaics the zone.
OFF (default): Displays the zone normally.
Follow the procedure below to set the privacy zone.
Note:
• The privacy zone function is disabled at initializing the unit, i.e. right after turning on the power.
**
ZONE NUMBER 1 /8
**
PUSH SET
POSITION
LEFT
DEL
ZONE LEVEL
..I.... 2
"SYSTEM SETUP" screen
“ZONE NUMBER” screen
RET
TOP END
MANUAL
SYNC
PRIVACY ZONE
STABILIZER
EL-ZOOM
UPSIDE-DOWN
ON(2)
INT
OFF
OFF
OFF
I...... 0
- +
LDC
FOCUS
**SYSTEM SETUP**
RET TOP END
UPPER
- +
