Panasonic WV-BS300, Инструкция по эксплуатации

Страница: 19 / 25

- 16 -
(3) Camera Resetting
Move the cursor to "CAMERA RESET" by using the joystick, and
press the F3 button.
This camera is reset to the factory preset condition.
(In case of WV-RM70, keep pressing the Right, Left and Set switches
simultaneouly more than 2 seconds.)
(4) To close the SPECIAL menu
Move the cursor to "RET" by using the joystick, and press the joystick.
The setup menu is displayed.
■
How to reset to factory setup
Any of the above settings plus the ALC/MANUAL level control and phase
adjustments, can be reset to the factory setup by placing the cursor over
the desired mode and then simultaneously pressing both the joystick for
more than 2 seconds.
* SPECIAL *
AP GAIN ....I....
PEDESTAL .I.......
−
+
CAMERA RESET
→
PUSH SW
RET
* SPECIAL *
AP GAIN ....I....
PEDESTAL .I.......
−
+
CAMERA RESET
→
PUSH SW
RET