Panasonic WJRT208 - Digital Disk Recorder Скачать руководство пользователя страница 35

Страница: 35 / 62

Disk information (DISK INFORMATION)

In regard to hard disc initialization and hard disc index
recovery, refer to 3.4 herein.

Reboot system (REBOOT SYSTEM)

(1) Press the [MENU] button. "WJ-RT208 SETUP MENU"

appears. Move the cursor to "SYSTEM MANAGEMENT"
and press the [SET] button. (Refer to steps (1) and (2)
in 3.1.1.)

(2) Move the cursor to "REBOOT SYSTEM" and press the

[SET] button.

(3) The confirmation dialog box will be displayed.

(4) Move the cursor to [OK] and press the [SET] button.

Picture adjustment (PICTURE ADJUST)

(1) Select the desired channel to be adjusted by using the

direction button (up/down) or the appropriate numeric
button.
The image frame of the selected channel (camera)
blinks.

(2) Press the [MENU] button. "WJ-RT208 SETUP MENU"

appears. Move the cursor to "SYSTEM MANAGEMENT"
and press the [SET] button.
(Refer to steps (1) and (2) in 3.1.1.)

(3) Move the cursor to "PICTURE ADJUST" and press the

[SET] button.

(4) Move the cursor to the item to adjust and change the

numeric value with the direction button (right/left).

Note:

During playback on Channel 1, the screen setup

cannot be used.

(5) When adjustment is completed, move the cursor to

[Return], and press the [SET] button. The newly set
conditions are saved.

Note:

When "PICTURE ADJUST" is selected in a chan-

nel where no input signals are available.

Time & date (TIME & DATE)

Refer to 1.4 for the system’s time period.

Version (VERSION)

(1) Press the [MENU] button. "WJ-RT208 SETUP MENU"

appears. Move the cursor to "SYSTEM MANAGEMENT"
and press the [SET] button. (Refer to steps (1) and (2)
in 3.1.1.)

(2) Move the cursor to "VERSION" and press the [SET] but-

ton.
The current software version of this unit is displayed.

Note:

Refer to the Network Operating Instructions for

the software upgrade.

SYSTEM MANAGEMENT

SYSTEM SETUP

DISK INFORMATION

REBOOT SYSTEM

PICTURE ADJUST

TIME & DATE

VERSION

REBOOT SYSTEM

Cancel

Do you really want to
reboot system ?

CH1 PICTURE ADJUST

Return

Contrast

Brightness

Color

Saturation

SYSTEM MANAGEMENT

SYSTEM SETUP

DISK INFORMATION

REBOOT SYSTEM

PICTURE ADJUST

TIME & DATE

VERSION

PICTURE ADJUST

No.X channel has none signal,
can't do adjust.

VERSION

Current Version 1.30

Содержание WJRT208 - Digital Disk Recorder































































Результаты поиска

Содержание WJRT208 - Digital Disk Recorder

Отзывы:

Бренды по названию

Популярные бренды

Panasonic WJRT208 - Digital Disk Recorder, Руководство по эксплуатации

Результаты поиска

Содержание WJRT208 - Digital Disk Recorder

Отзывы:

Бренды по названию

Популярные бренды