123
120 GB:
Indicates the hard disk capacity (disk existed
when started up last time)
120 GB M:
Indicates the hard disk capacity (mirrored disk
existed when started up last time)
ADD (120 GB):
Indicates that this hard disk is newly mount-
ed at this startup, but it was not mounted last time.
Those parenthesized numbers indicate the capacity of
the hard disk.
ADD (ERROR):
Indicates that this hard disk is newly
mounted at this startup, but it was not mounted last
time. Then, an error is detected in the hard disk.
* (120 GB):
Indicates that a different hard disk from the one
existed at the last startup is mounted. Those parenthe-
sized numbers indicate the capacity of the hard disk.
* (ERROR):
Indicates that a different hard disk from the one
existed at the last startup is mounted, and an error is
detected in the hard disk.
LOST:
Indicates that a position where a hard disk was
mounted at the last startup has no hard disk.
–:
Indicates that a hard disk is not mounted this time as well
as at the last startup.
■
Display of the HDD DISK MENU Disk configuration menu screen
Information of the hard disk drive of the unit or the extension unit will be displayed on the "HDD DISK MENU".
Format
Mirror ON
Mirror OFF Remove Link
Restart
Close
SET : [SET]
Digital Disk Recorder
WJ-HD300
HDD DISK MENU
TOP MENU
120GB M
120GB
120GB
120GB
*(120GB)
ADD (120GB)
120GB
LOST
MAIN
EXT7
EXT6
EXT5
EXT4
EXT3
EXT2
EXT1
120GB M
120GB
120GB
120GB
*(ERROR)
ADD (ERROR)
120GB
-
120GB
120GB
120GB
120GB
120GB
120GB
-
120GB
120GB
120GB
120GB
120GB
120GB
-
1
2
3
4
Main unit/extension unit
Information about hard disk located in the main unit and extension unit
ERROR:
Indicates that the hard disk had failed to be initial-
ized.
Important:
• It is impossible to operate the unit when there is a hard
disk with indications of * (capacity), * (ERROR), LOST
or ERROR. In this case, remove the relevant hard disk.
(Refer to page xx.)
• Hard disks with ADD (capacity) indication are not initial-
ized yet.
First, initialize them. It is impossible to record images on
it nor to use as a copy destination without initialization.
Note:
The displayed available disk space on this menu will
not include the space required for data management.
Therefore, the undercounted available disk space will be
displayed. It is possible to display information about the
recording area (allocated disk size for normal recording
area, event recording area, copy area) by pressing the
SEUP/ESC button while displaying the "TOP MENU" of the
"HDD DISK MENU".
■
About the HDD DISK MENU
The operations regarding the hard disk can be performed with displaying the "HDD DISK MENU" on the monitor 2.
The "HDD DISK MENU" will be displayed when the SET button is pressed while displaying the system check complete window.
The "HDD DISK MENU" will also displayed automatically after the replacing or removing the hard disk.
The following operations can be performed on the "HDD DISK MENU".
Setting item
Format
Mirror recovery
Description
Formats (initializes) the hard disk. It can also change setting values for the
recording area respectively. Mirroring also can be started on this menu.
Recovers the mirrored hard disk.
Page
xx
xx
Mirror cancel
Remove Link
Restart
Cancels mirroring.
Removing the hard disk drive from the system logically.
Restarts this unit.
xx
xx
xx
Exit
Close the "HDD DISK MENU".
xx
Содержание WJHD316 - DIGITAL DISK RECORDER
Страница 4: ...4 CONTENTS...
