53
Main Monitor
Figure 66: Display – Main Monitor setup screen
Highlight the box beside “Mode” and press the button. You can select between “Full Sequence” and
“Partial Sequence”.
Pressing the [SEQUENCE] button causes the recorder to sequence cameras, and the recorder can sequence
cameras in two modes: “Full” and “Partial”. In the Full mode, the recorder sequences through the cameras
and displays them full screen.
In the Partial mode, the bottom right window in a multi-screen format sequences through the cameras.
Note: Any cameras that are Off, have lost video or are set to Covert (unless the user has authority to
view covert cameras) will be excluded from the Partial sequence.
You can define the screen layout in a variety of formats and set the recorder to sequence through the different
screen layouts (pages) so that all the cameras will be displayed. You can also set up the recorder to display
one camera or a group of cameras all the time while cycling through the remaining cameras in a “channel”
window. This can be done with one camera displayed full screen while displaying the channel window as
a PIP (picture in picture), or displaying the cameras in a grid pattern with the bottom right window as the
channel.
Note: Sequence cannot be used in the 3x3 mode of the 8-channel recorder.
You can adjust the display dwell time by highlighting the box beside “Interval” and pressing the button. You
can select dwell intervals ranging from 1 second to 1 minute.
Highlight “Event Monitoring On” and press the button. Pressing the button toggles between On and Off.
When it is On, the recorder will display the camera associated with the event when an event occurs.
Highlight the box beside “Resolution” and press the button. You can select from 1280
1024, 1440
900
and 1920
1080 (@ 60 Hz or 50 Hz).
