background image

82

[Panasonic alarm protocol]

Select "On" or "Off" to determine whether or not to automati-
cally notify the PC of the event information by Panasonic 
alarm protocol at an event occurrence. 

[Mail]

Select "On" or "Off" to determine whether or not to transmit 
the alarm mail according to the settings of the "Server" page 
- the [Mail] tab (

+

 page 97) at an event occurrence. 

     

[Back] button

Closes the time table of the selected day of the week and 
returns to the [Time table] tab. 
     

Set the following items for desired special days 

[Date]

Enter the desired date to be set as a special day. 

[Mode]

Select the day of the week to which the desired schedule is 
assigned. 

Note:

  •  Only the days of the week to which programs have been 

assigned on the [Time table] tab will be displayed.

    It is impossible to select this item when there are no 

available days of the week.

Configure the settings of recording programs for special days [Special 

days]

Select the [Special days] tab on the "Schedule" page. (

+

 Page 60)

It is possible to assign timetables to special days aside from other days of the week. Time tables for special days can be set for 
up to 30 days. 
The settings are configured by specifying dates as special days and by applying a schedule to the specified special days. 
     

Содержание WJ-HD716K





























































































































































Отзывы: