Panasonic WJ-HD716K, Руководство по установке

Страница: 50 / 156

50
Time and polarities of the ALARM/CONTROL terminal and the ALARM
terminal
Terminal Active time Remarks
Alarm input
100 ms or more
When N.O.: L active
When N.C.: H active
Alarm output The set time on the setup menu L active
Alarm reset input 100 ms or more L active
Emergency recording input 100 ms or more L active
Available disk space warning
output Duration set for "Buzzer"* starting from the time of the
error occurrence
L active
HDD error output Duration set for "Buzzer"* starting from the time of the
error occurrence
L active
Camera error output Duration set for "Buzzer"* starting from the time of the
error occurrence, or until the camera is reset (from the
time of the error occurrence).
L active
Error output Duration set for "Buzzer"* starting from the time of the
error occurrence
L active
Time adjustment I/O Input: 100 ms or more, Output: 1 s Input/Output: L active
Alarm suspension input 100 ms or more L active, judged by level
External recording mode
changeover
100 ms or more L active, judged by level
Sequence switchover I/O 100 ms or more L active
Outage detection input 5 s or more L active
Outage processing end output 10 s or more H active
* "Buzzer" can be set on the "Basic" page of the setup menu. (
+
Page 65)
Note:
• During "L active (Low active)", the logic will be implemented when the voltage level of signal is low.
• During "H active (High active)", the logic will be implemented when the voltage level of signal is high.