Panasonic WJ-HD716K, Руководство по установке

Страница: 29 / 156

29
Connection of cameras
Up to 16 cameras (system cameras or combination cameras) can be connected to the video input connector 1-16.
Important:
• When using with a Panasonic's matrix switcher or a coaxial communication unit, make sure that the loop-through output
connection (of each video input) to the recorder are correctly made. When a monitor output or a spot output is connected to
the video input connector of the recorder, noise may be produced upon switching camera channels or images of few sec
-
onds before switching camera channels may be displayed/recorded. When a monitor output or a spot output is connected to
the video input connector of the recorder, noise may be produced upon switching camera channels or images of few sec
-
onds before switching camera channels may be displayed/recorded.
• Connect the power plug of the recorder at the very end of connections.
• When connecting combination cameras to the WJ-HD616K, connect them to the video input connector 1 - 8 (coaxial con
-
nection compatible).
• It is impossible to connect a VCR to the video input connector.
Mode switch setting (default)
Note:
• When not using the DATA port and the RS485 port, do not change the setting from the default.
Connections
Combination cameras
(Video input connector 1 - 8)
System cameras
(Video input connector 9 - 16)
EXT STORAGE MODE DATA RS485(CAMERA) 10/100BASE-T
ALARM
VIDEO
OUT-CASCADE-IN ALARM/CONTROL CASCADE IN
MONITOR
OUT
OUT MONITOR OUT(HD) AUDIO IN
AUDIO
OUT
3 2 1
1 2 3 4 5 6 7 8
1 2 3 4
4 2
3 1
1 2
5 6 7 8 9 10 11 12 13 14 15 16
IN
OUT
2
1
3 4 5 6 7
7
1 2 1 2
8 9 10 11 12 13 14 15 16
POWER
AC IN
SIGNAL
GND
ON
OFF
OUT
IN
OUT
CASCADE
1
2
• • • • • •
6 7 8 1 2 3 4 5
ON
Amplifier
Microphone
Mode switch setting (default)
Note: When not using the DATA port and the RS485
port, do not change the setting from the default.
Recorder