Panasonic WH-SD24BE5, Руководство по эксплуатации

Страница: 6 / 44

6
Recommendation Recommendation
• It is strongly recommended to have the authorized dealer to change the water temperature range. The temperature range
for water outlet temperature and outdoor ambient temperature could be set by control panel.
Perform the steps below to set preferred temperature range.
SET
SELECT
CANCEL
ERROR
RESET
SETTING STATUS
SEARCH
PUMPDW
CHECK
2
,
4
1
,
5
3
STEP 1:
Press
SET
for 5 seconds to enter SETTING mode. “SETTING” indicator is ON.
STEP 2:
Press or to choose a parameter.
H2O Lo: Water outlet set
temperature at low outdoor
ambient set temperature
Selection range:
25°C ~ 55°C
HEAT
SETTING
STATUS
PUMPDW
C
H2O Hi: Water outlet set
temperature at high outdoor
ambient set temperature
HEAT
SETTING
STATUS
PUMPDW
C
Selection range:
25°C ~ 55°C
Out Lo: Low outdoor
ambient set temperature
HEAT
SETTING
STATUS
PUMPDW
C
Selection range:
-15°C ~ 15°C
Out Hi: High outdoor
ambient set temperature
HEAT
SETTING
STATUS
PUMPDW
C
Selection range:
-15°C ~ 15°C
Note: Please make sure High outdoor ambient set temperature (Out Hi) is always higher than Low outdoor
ambient set temperature (Out Lo).
STEP 3:
After selecting the desired parameter , press
SELECT
to enter the parameter. “ ” indicator will blink when a
parameter is selected.
STEP 4:
Press or to set the desired temperature.
STEP 5:
Press
SET
again to con fi rm the setting.
• Repeat steps 2 to 5 to set other parameters.
• Press
CANCEL
or wait 30 seconds to exit SETTING mode.
• The setting temperature will be stored in the system once con fi rm.
• “SETTING” mode cannot be activated when the “PUMPDW” and “STATUS” indicator is ON.
ADVANCE OPERATION ADVANCE OPERATION
F566899_OYTH0907-00_1EN.indd 6 F566899_OYTH0907-00_1EN.indd 6 8/5/2009 2:05:53 PM 8/5/2009 2:05:53 PM