Terminal screw on PCB
Maximum tightening torque cN•m {kgf•cm}
M3 50
{5.1}
M4 120
{12.24}
Installation of Remote Controller
Installation
Location
Install at the height of 1 to 1.5 m from the floor (Location where average room temperature can be detected).
Install vertically against the wall.
Avoid the following locations for installation.
1 By the window, etc. exposed to direct sunlight or direct air.
2 In the shadow or backside of objects deviated from the room airflow.
3 Location where condensation occurs (The Remote Controller is not moisture proof or drip proof.)
4 Location near heat source.
5 Uneven
surface.
Keep distance of 1 m or more from the TV, radio and PC. (Cause of fuzzy image or noise)
Guide cables through
this hole to bushing
e
How to guide optional cables to bushing
Guide cables through
this hole to bushing
e
How to guide optional cables to control board
Guide cables through
this hole to bushing
e
Guide cables through
this hole to bushing
e
Bind optional
cables with
this band
How to guide optional cables (view without internal wiring)