4. Operating Instructions of System
TIMER
1
MON TUE WED THU FRI SAT SUN
2 3 4 5 6
ON
OFF
C
SOLAR
REMOTE
Heating & Domestic Hot Water Operating Times Set Up
NOTE: This timer is not like normal timers you may have operated before, the Panasonic timer
works on the basis of last command stands, once you start a command this will stand unless
you ask for another command to operate/commence or switch the command “OFF”
Panasonic would recommend that you set you DHW preparation for 24/7 (standing heat loss on
new cylinders is negligible).
It can also be advantageous to set your heating system to be active 24/7 during the heating
demand season- consult your installer for the most effi cient set up given your design and
requirements.
Setting the weekly timer for operation of heat / tank to be activated
To enter the Timer mode
1. Press the TIMER button.
Setting the date and time for operation to be activated
2. Press the UP or DOWN button to select your desired day.
3. Press the SELECT button to confi rm.
“1” will be blinking.
4. Press the SELECT button to set Program 1.
5. Press the OFF/ON button to select ON or OFF timer.
6. Press the UP or DOWN button to select your desired time.*
7. Press MODE to select operation to be carried out
If HEAT or HEAT + TANK is selected you are able to change the shift temperature with the UP
or DOWN bottom.
Press the SET button to confi rm Program 1.
The selected day is identifi ed with the symbol.
After 2 seconds, the display will move to the next program.
8. Repeat the steps 4 to 7, starting with the OFF/ON button, to set additional commands 2 to 6
(if required).
9. If no buttons are pressed for 30 seconds during timer setting, or if you press the SET button,
the current setting is saved and the timer setup is ended.
* In step 6 you can also activate QUIET or HEATER by pressing such bottoms in the remote
instead of the MODE one and following the same procedure
** If cooling is activated then you may/will not be eligible for government grants.
Operating Instructions (Controller)
AUTO HEAT HEAT + TANK TANK COOL
Indicates the sele
Lights up if Timer operation is selected
6 different programs can be set in a select day (1 ~ 6)
Water temperature thermo shift (-5ºC ~ 5ºC)
OFF Timer - To automatically switch “OFF” the
ON Timer - To automatically switch “ON” the unit
Day to be selectedunit
SET
SELECT
CANCEL
SETTING
CLOCK
OFF/ON
TIMER
STATUS
MODE
HEATER
QUIET
OPERATION
ACTUAL
HEATER
BOOSTER
QUIET
SETTING
STATUS
SERVICE
AUTO
HEAT
COOL
TANK
HEATER
FORCE
°C
°C
ON
OFF
MON TUE WED THU FRI SAT SUN
hr
hr
kwh
**
USER GUIDE
7
UK_MANUAL_B.indd 7
29/07/15 12:18
