![background image](http://html.mh-extra.com/html/panasonic/vl-wd812az/vl-wd812az_users-information-manual_277700003.webp)
R
Do not perform any actions (such as fabricating,
twisting, stretching, bundling, forcibly bending,
damaging, altering, exposing to heat sources, or
placing heavy objects on the power cable) that may
damage the power cable. Using the product with a
damaged power cable may cause electric shock,
short circuits, or fire. Contact an authorised service
centre for repairs.
R
Unplug the product if the product emits smoke, an
abnormal smell or makes unusual noise, or if the
product has been dropped or physically damaged.
These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact
an authorised service centre.
Preventing accidents and injuries
R
Do not pull or hang off the product or power cable.
Pulling out the power cable may cause electric shock
or cause the camera to fall down, resulting in injury.
R
Do not drop the product or expose it to a strong
impact. To prevent the product from falling, securely
fix the safety wire to the product and a wall.
R
The sensor range cap may become a choking
hazard. Keep it out of reach of children. If you suspect
a child has swallowed the sensor range cap, seek
medical advice immediately.
CAUTION
Preventing fire and electric shock
R
Do not use the product in areas that are exposed to
moisture, steam, or oily smoke, or areas that have
excessive dust.
Preventing accidents and injuries
R
Do not put your ear(s) near the speaker, as loud
sounds emitted from the speaker may cause hearing
impairment.
R
Do not look directly at the LED lights when they are
lit. Failure to do so may cause damage to eyes.
Important safety instructions
When using this product, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, or personal injury.
1.
Use only the power supply unit and AC cable
indicated in this manual.
SAVE THESE INSTRUCTIONS
For best performance
R
Do not allow the lens cover
(
A
) or the heat sensor (
B
) to
become scratched or dirty.
(This may cause image
quality to be reduced,
incorrect detections,
malfunctions, or damage to
the lens cover and heat
sensor.)
A
B
R
Do not expose this product to direct sunlight or
other forms of powerful light such as halogen lights
for long periods of time. (This may damage the
image sensor.)
Other important information
Privacy and rights of portrait
See the Installation Guide for the camera or the
Operating Instructions of the Video Intercom System for
more information.
Camera image quality
R
Camera images may have the following
characteristics.
– Colours in images may differ from the actual
colours.
– When there is light at the back of the object, faces
may appear dark.
– Image quality may be reduced in dark locations.
– Images may appear hazy when there are outdoor
lights in use.
R
Effect of brightness and distance on image quality:
Distinguishing faces is difficult in the following
situations.
– When the person is too far (over approx. 3 m)
from the camera even when the surrounding area
is bright.
(Depending on the viewing angle or the
conditions when images were viewed, such as
when there are shadows or backlighting, faces
may not be distinguishable even when the person
is within 3 m of the camera.)
– In the late afternoon and at night, or other times
when the surrounding area is dark. (This may
reduce image quality.)
– When people are moving (which causes blurring)
in front of the camera.
Repairing, transferring, disposing, or returning the
product
Requesting repairs for the product
R
Note that the settings of the camera may be altered
or changed to the default settings during repairs.
3