![background image](http://html.mh-extra.com/html/panasonic/vl-wd812az/vl-wd812az_users-information-manual_277700007.webp)
Indicator lamp
After the camera has been registered to the main monitor, you can check the camera’s status and the wireless signal
status from the main monitor by checking the status of the indicator lamp.
Indicator display
Camera’s status
Transmission
status
Flashing green
(fast)
A sensor has been triggered and the camera is calling the main monitor.
Flashing green
(slow)
The camera is transmitting data to the main monitor.
Signal status
(during standby)
Lit green
Strong
Indicates the signal status from the main
monitor.
R
We recommend installing the camera in
an area where the status indicator is
strong (when the indicator is lit green).
Lit orange
Lit red
Weak
Flashing red
Transmissions cannot be sent because there is no signal (out of range).
R
Depending on how [Indicator lamp] is configured, the indicator may always be off or only be lit when transmitting
(when monitoring or talking) with the main monitor. (See the [Indicator lamp] setting in the Operating
Instructions of the Video Intercom System.)
Cleaning
In order to prevent incorrect sensor detections, disconnect the power from the camera when cleaning the camera.
Wipe the camera with a soft cloth.
R
When the camera is excessively dirty, wipe it with a slightly damp cloth.
Important:
R
Do not directly spray the camera with water from a hose or other objects.
(There is a risk of fire or electric shock if water enters inside the camera.)
R
Do not use any cleaning products that contain strong or weak detergents, alcohol, polish powder, powder
soap, benzine, thinner, wax, petroleum, or boiling water. Also do not spray the product with insecticide,
glass cleaner, or hair spray. This may cause a change in colour or quality of the camera.
Specifications
Power source
Power supply unit (VL-PS241)
24 V DC, 0.4 A
Power consumption
During standby: approx. 1.5 W
During operation: approx. 4.5 W (when the LED lights are not lit), approx.
8 W (when the LED lights are lit)
Dimensions (mm) (height
´
width
´
depth)
Approx. 160
´
118
´
290 (when the camera is front facing and including the
wall mount bracket)
Mass (weight)
Approx. 960
g
Installation method
Wall mount (wall mount bracket supplied)
Operating environment
Ambient temperature: approx. -20 °C to +50 °C
Relative humidity (non-condensing): up to 90 %
Transmitting range
Approx. 100 m (line-of-sight distance from the main monitor)
Frequency range
1.88 GHz to 1.90 GHz
Image sensor
0.3 M pixel CMOS
Minimum illuminance required
1 lx
*1
Focal length
Fixed (0.4 m - infinity)
Angular field of view (camera
angle)
Horizontal: approx. 53°, vertical: approx. 41°
7